How To Reset Blink Camera To Factory Settings. We also recommend inserting either a paperclip or small screwdriver (not safety pins or thumbtacks) to reset the camera. Insert both batteries back into the camera.
The sync module is ready to be added through the blink app. The blink mini has a reset button on the bottom side of the camera, which may be necessary to use when you add it to a new or existing blink system. Keep the reset button at the back of the nvr to set everything back to defaults.
When A Mini Displays A Solid Red Light, A Long Press Of The Reset Button (More Than 5 Seconds) Will Reset It And Resolve Setup Issues.
The button should be next to the usb port. Follow these steps to delete and reinstall your sync module: Keep the reset button at the back of the nvr to set everything back to defaults.
Insert Both Batteries Back Into The Camera.
If you want to reset your blink sync module, press and hold the reset button found on the sync module. For instructions on how to do a full factory reset of your sync module, contact customer service. Solid green and blue light will appear once the reset is done.
The Sync Module Is Ready To Be Added Through The Blink App.
Insert a paperclip or thin item into the opening and press lightly until you feel a click. This is the best option to go for in case all others have failed. We also recommend inserting either a paperclip or small screwdriver (not safety pins or thumbtacks) to reset the camera.
Immediately Press And Hold The Reset Button Just To The Right Of The Yellow Lithium Only Sticker For 10 Seconds.
If you forget your camera’s password, you can perform a reset to return all settings to the factory default. Once the light turns red, you have to delete and reinstall the sync module in the blink app. Wait for the cameralink power led to blink red.
You Can Reset The Blink Camera By Pressing And Holding The Reset Button On The Sync Module.
When a mini displays a solid red light, a long press of the reset button (more than 5 seconds) will reset it and resolve setup issues. A hard reset will revert your blink camera to its original factory settings. By factory resetting the camera, all backdrops will be turned to default.