How To Paint A Stone Fireplace. A terrycloth towel or painters rag will work best, as opposed to a paper towel. I did wait 2 days in between coats to allow the first coat to completely dry.
I painted the whitewash and removed it quickly. Stir well to mix the paint and water. Paint(you may want to use a heat resistant masonry paint depending on the type of fireplace) the first thing i did was make sure to tape off everything i did not want painted.
Table of Contents
Then, Paint / Highlight The Raised Areas Of The Stone To Add Depth.
I used plastic sheeting to tape off the fireplace and the windows surrounding the fireplace and mantel. Add more highlights if desired. You can add a little more paint if its too thin.
I Painted The Whitewash And Removed It Quickly.
My answer to you on how to go about painting a stone fireplace white is as simple as 1. Be sure to mix enough for your entire stone surface or you may have different colors of paint in different areas. Products used to paint the stone fireplace:
First, Ethan Coated All The Stone And Mantel With Bonding Primer.
When it comes to actually painting a stone fireplace, there is a bit of a technique that comes in handy. We also used white chalk paint in linen white. Then i simply took some white paint and diluted it by about 50% with water.
It’s Not A Flat Surface So It’s Going To Be A Little Tricky Until You Get The Hang Of It.
The first step to painting a stone fireplace and getting the results you want is to purchase primer and paint that work well over stone. Paint over the stone until you’re happy. Stir well to mix the paint and water.
Do A Section At A Time.
When the paint completely dried (4 hours or later), i used the wise owl varnish in matte to topcoat the fireplace. If playback doesn't begin shortly,. I only used 16 oz and this paint gave me full coverage.
