Floor Joist Bridging Requirements. 1 grade 2 by 6 douglas fir larch joists spaced 16 inches on center. It also helps reduce vibration and long term problems, such as dipping in the floor or sagging in the ceiling.
The minimum number of rows required is shown in the table. Joist reinforcers such as flitch plates can be handy. Bridging holds the joists in line and helps distribute the load carried by the floor unit.
Table of Contents
The Benefits Of Bridging Go Beyond Just Load Share.
The joist must have a minimum of 1 1/2″ riding on the wall or beam. Is bridging required for i joist? Weyerhaeuser has found that the addition of bridging does little to improve floor performance and may create squeaks.
Floor Joist Bridging Is Critical To The Structural Strength Of A Floor, As Shown In Figure 1.
Erection bridging requirements are defined for joist spans over 60 feet through 100 feet [.757(d)(2)] over 100 feet through 144 feet [.757(d)(3)] and over 144 feet [.757(d)(4)] there are additional bridging requirements for bottom chord bearing joists [.757(d)(5)] The minimum number of rows required is shown in the table. Select the on center spacing for the joists.
It Prevents Twisting Of The Joists And It Distributes Loads Over Several Joists.people Used To Build To 1/240 Deflections And Nail Boards.
Nail bridging on all joists. Proper bridging distributes the load on the floor to other joists and over time prevents floors from sagging and squeaking do to floor joists twisting and warping. Both ends should be blocked or affixed to rim joists/band joists.
If The Joists Are Lapped, Then They Must Be Lapped At Least 3″.
A use of rim or band joist can be substituted for blocking. Weyerhaeuser has found that the addition of bridging does little to improve floor performance and may create squeaks. Building code requires the use of blocking for floor joists that exceed 2 inches in width by 12 inches in depth.
You Are First Looking For Your Floor Joist Size.
It is usually required when the joist spans are more than 8 feet. Joists spanning between 8 and 15 feet need one row of bridging at the center of the span. Ibc code requires bridging at 8 ft o.c for 2×12 or deeper joists, 1:6 width to depth ratio.
