How To Check Automatic Transmission Fluid Ford Ranger. Drive the vehicle 20 miles (30 km) to reach normal operating temperatures. When asking around some say gearbox and tranfercase one system other say no.
Start the truck and let it run for 2 minutes and then, holding the brake, shift it through reverse and drive, hesitating for 30 seconds in each position. Those were the good old days and sadly, they are long gone. Engage parking brake, start engine.
Changing The Oil Involves Emptying The Old Fluid, Changing The Filter And Putting In New Fluid.
Start the engine and move the gear selector through all gears in the shift pattern. How to check automatic transmission fluid ford ranger. In this video we go over how to do a fluid change on an automatic transmission for a 2008 ford ranger 4×4.
To Check The Gearbox And Transfercase Oil Level Want To Make Sure Doing It Correct.
You should be able to buy on cheaply at most auto parts or home improvement stores. You needed only to find the dipstick, check the dipstick, and add fluid if needed. Press the brake pedal and move the gearshift lever slowly through all gear ranges.
If Driven In Hot Weather Or City Traffic, Allow Transmission To Cool For 30 Minutes.
Start the truck and let it run for 2 minutes and then, holding the brake, shift it through reverse and drive, hesitating for 30 seconds in each position. Step 2 locate the engine oil dipstick. Old transmission fluid will be awful to the ear.
To Check And Add Transmission Fluid On Your Ranger:
The ranger takes type h transmission fluid; Check 8000 km/ 6 months, change 96000 km: For model years 2001 on, the transmission fluid dipstick has been nearby on the i4 engine, so don’t confuse the two.
This Coming Weekend I Plan To Change The Automatic Transmission Fluid And The Filter.
With the engine running and the transmission in neutral, check the fluid and fill as needed. Screw back the drain plug with a new gasket and refill the transmission with new atf. Step 1 park the car on level ground and let the oil drain five minutes into the oil pan after cutting the engine.