How To Change Battery In Chevy Equinox Key Fob. The equinox should start up just fine. Then take the battery cover box out of its hinges.
The equinox should start up just fine. Make sure to align the new battery in the same position as the previous one. Insert the metallic key and turn it on the side.
Line Up The Battery Cover Over The Rear Of The Fob And Gently Snap It In To Place.
Insert the door key into the slot on the bottom of the cover. While in range of the vehicle, press the “ lock ” button on the key fob. Make sure to align the new battery in the same position as the previous one.
Place The Vehicle Gear In P Or N.
Test the new key fob battery by standing next to your equinox and pressing the. Chevy equinox keyless remote programming instructions. Gently insert a flathead screwdriver into the small slot on the side of the key fob.
Set The Cover Aside In A Safe Place.
To remote start the 2018 chevy equinox, hit the lock button twice on the key fob, then hold the remote start button down for about 10 seconds likealternative like every two years or so, or when the battery is low, you may need to change the key fob battery. Make sure that the cover is flush with the key fob at each edge. Test new key fob battery:
Then Pry Off The Battery Cover On The Back Side Of The Fob Using Your Thumb In The Ignition Key Cutout On The Side.
In the video, 1a auto shows how to change the key fob. Move the key out of the way if it is in the fob. Then take the battery cover box out of its hinges.
The Equinox Should Start Up Just Fine.
Chevrolet equinox key fobs and transponder flip key are battery operated. It should pop neatly open and allow you to replace. This type of key fob is common on many chevrolet models, such as the camara, cruze, equinox, volt, and others from the model years 2010 to 2016.